Examples: Installing the brake chopper module and a
cooling fan
Example 1: Installation into generic closure
Note: To ensure proper cooling, the brake chopper module and the cooling fan must be
positioned exactly as illustrated in relation to each other.
1. Attach the brake chopper module (b) to the installation surface of the enclosure. See
Installing the brake chopper module
2. Install the cooling fan (e) using a separate mounting plate (d).
The mounting plate is also used to prevent cooling air recirculation in the cabinet.
Therefore, the plate has to cover the whole cross-sectional area of the cabinet.
A
Description
A
Brake chopper cubicle, side view
B
Brake chopper cubicle, front view
C
Brake chopper module, front view
a
DC fuses
b
Brake chopper module
c
Power connection terminals
d
Cooling fan mounting plate*
e
Cooling fan
* Not available from ABB
For more information on the dimensions, see chapter
on page 20.
B
a
b
c
d
e
Mechanical installation 21
C
Dimension
drawings.