TRENDnet User's Guide
Video Tampering
You can configure the camera to trigger the alarm when the lens is covered
and take certain alarm response actions.
© Copyright TRENDnet. All Rights Reserved.
Detection area for this alarm is the whole screen.
1.
2.
3.
Exceptions
The exception type can be HDD full, HDD error, network disconnected, IP
address conflicted and illegal login to the cameras.
Check Enable Video Tampering checkbox to enable the video tampering
detection.
Click Edit to edit the arming schedule for video tampering. The arming
schedule configuration is the same as the setting of the arming schedule
for motion detection. Check the checkbox to select the linkage method
taken for the video tampering.
Click Save to save the settings.
TV‐IP328PI
35