Cleaning And Care - GUTMANN Futura 01 ML Operating Instruction

Cleaning and Care

Cleaning the Surface
Risk of Electrical Shock!
Separate the exhaust hood from the
electrical supply by removing the plug from
the outlet or tripping the fuse. Please make
sure that no water enters the device during
cleaning.
Early cleaning of the surfaces prevents
toilsome removal of deep-rooted debris
later. Please only use standard detergent
or all purposes cleaners which are suitable
for stainless steel/aluminum surfaces.
Never use scouring cleaners or steel wool.
After cleaning the hood, treat the stainless
steel surfaces with an appropriate
preserving agent. Painted surfaces should
be cleaned with a mild detergent and a very
soft cloth.The control panel must only be
cleaned with a soft, damp cloth.
Remove / Clean the Grease Filter
Danger of Fire!
The performance of the exhaust hood is
affected by greasy debris; the risk of fire
increases with the amount of deposits. In
order to avoid the risk of fire, be certain to
regularly clean the metal filter.
The metal filter must be cleaned every two
weeks, at the latest.
In order to be able to remove the metal filter,
the glass element must first be removed.
To do so, hold the glass element tightly on
the sides with both hands and push it
upwards (1) until the glass element comes
out of the guides. The glass element can
now be removed from the front (2). The
metal filter is now freely accessible and can
be removed from the front (4) after the guard
(3) has been pressed. Reassembly takes
place in the reverse order.
The metal filter is best cleaned in a
dishwasher with gentle dishwasher
detergent.
The manufacturer offers no guarantee in
the event of possible discoloration through
the use of aggressive cleaning products.
Temperatures above 55 degrees should
also be avoided.
Warning: Please do not use any 3 phase
cleaners or clean the filter in a commercial
dishwasher. Cleaning with aggressive
products such as benzene, acetone,
trichloroethylene, et cetera will lead to the
destruction of the filter!
Replace the metal filter after cleaning and
then replace the glass element.
Carbon Filter Exchange, see you page 45,
Activated carbon filter
For activated carbon filters fitted in GUT-
MANN extractor hoods (C Version), please
read the separate operating instructions
provided!
en
15