Cleaning And Care - GUTMANN Stratos Operating Instruction

en
Lighting
the field with the lighting symbol to
Touch
switch on the lighting. The lighting is
switched off by touching again. Touch the
lighting symbol for a longer time = lighting
is dimmed, LED lighting not dimmable
Display grease filter cleaning
The filter needs cleaning when the filter
cleaning symbol is flashing. Touch the filter
cleaning symbol field for at least 10
seconds until the indicator lamp goes out.
The grease filter indicator is activated after
Button min. 5 sec.
pressures to a
LED goes off !
red

Cleaning and care

Cleaning of the surface
Risk of electric shock! Please separate the
extractor hood from the power supply
network by pulling the plug or the
disconnection of the fuse. Please pay
attention to the fact that no water seeps into
the appliance during the cleaning process.
Untimely cleaning of the surface saves later
a troublesome removing of stubborn
soiling. For the cleaning use only
commercial detergent or all-purpose
cleaners which are suitable for stainless
steel / aluminium.
scouring agents or steel wool!
cleaning of the extractor hood please tend
the stainless steel surfaces with a high-
grade steel-care product.
Only with a light soapy water and a very soft
cloth varnished surfaces have to be
cleaned. Please clean the switch panel only
with a soft and damp-dry cloth.
By extractor hoods with a pane beneath the
metal grease filter ("Perimeter Extraction")
fatty deposits can occur on the edge of the
pane. These deposits are founded
physically and represent no dysfunction of
the extractor hood. Please clean the pane
beneath the filter regularly to prevent
stubborn soiling.
Exchange and cleaning of the filter
Fire risk! The performance of the extractor
hood is affected by containing fat remains
and therefore the fire risk increases. To
prevent a fire risk please clean the metal
filter regularly. The metal grease filter must
be cleaned every 2 weeks at last.
By models with a pane beneath the filter
("Perimeter Extraction") the pane has to be
removed at first.
small front glass pane with one hand
upwards and then take the filter out at its
grip. The metal grease filter is fixed by a
magnet. The installation is made in reverse
order.
The metal grease filter is to be cleaned at
best in a dishwasher or in hot soapy water.
Aggressive cleaners should not be used.
The guarantee can´t be applied if a
Please do not use
After the
For this swing at first the