Barthelme CHROMOFLEX Pro Series Instruction Manual page 6

Fig. 1
5.2
Keypad configuration
Fig. 2
Slider
Function key white
Power key
There are two ways (New and Classic) for the key assignment, which can be changed at any time. The necessary
files can be found on our website www.barthelme.de. The change of firmware works with the "ProCEd" software
via the "Update Device Firmware" button, which is found in the "Setup" section of the program.
(The USB-Dongle 66000036 is required!)
CAUTION: Only use the firmware files for the specific devices, otherwise the remote can be damaged!
V1.1 / 12.01.2015
Function key red
Function key green
Function key blue
Dim key
6 / 8
®
CHROMOFLEX Pro Remote