Snom M Series Manual

How do I pair the A190 headset with an Mxxx series DECT
handset
It is possible to operate the A190
the handsets and base stations on the M-series, so
additional steps to be taken, reported at the bottom of this guide).
The headset will get the same extension number as the handset.
1. Open the user interface
2. On the " extension " page, click on the IPEI of the the
3. In the pull-down list of "
4. When you click on " Save
PAIRING THE A190 ON AN M300
To make this work on an M300 you would need to disable the Local Call Groups option, please follow these steps
1. Go the " Configuration
2. Click on the " Export " button, save the file and open it with an editor like Notepad++ (do not use Windows' Notepad)
3. Change the following setting to "
4. Get to the web user interface "
5. Click on the button " browse
Now you should be able to follow the above steps and pair the
Further Information
VoIP Essentials
Visit the Snom Forum
Open a support ticket
Find a local partner
Related articles
Configuring multiple SIP Extensions with an M-series DECT handset
headset as a stand alone device or to
M25, M65, M70, M80, M85
of your DECT base.
Paired Terminal ", select the "
", the headset is now registered with the same extension number as the handset
" page
off <allow_call_groups>off</allow_call_groups> ":
Configuration " page again
" and select the changed file
pair the headset with an handset registered at the base station. This works for all
and M90 working on
A190 , the A190 handset page will open and you will be able to pair the devices
Terminal Idx " of the handset .
A190 with any handset you need on the
M700 and M900 (for the M300 there are some
M300 .