Download Print this page
Sperian 2000 Series Manual

Sperian 2000 Series Manual

Air purifying respirator, belt mounted half mask

Advertisement

Quick Links

AIR PURIFYING RESPIRATOR Series 2000
DO NOT USE this respirator until you completely read and understand this instruction manual. You
are required to inspect your respirator prior to putting it into service. Please refer to the inspection
procedures in this manual.
I. INTRODUCTION
This manual provides instruction in the use and main-
tenance of the SURVIVAIR Series 2000 Belt Mounted
Half Mask Respirator. The respirator comes in three
sizes: small, P/N 250050, medium, P/N 260050, and
large, P/N 270050. You must read and understand
this manual and be trained in the proper use of this
respirator before wearing it in a contaminated at-
mosphere.
II. SAFETY PRECAUTIONS
The Warnings, Cautions, and Notes contained in this
manual have the following significance:
WARNING
Maintenance or operating procedures
and techniques that will result in personal
injury or death if not carefully followed.
CAUTION
Maintenance or operating procedures and
techniques that may result in damage to
equipment if not carefully followed.
Maintenance or operating procedures and
techniques or information considered impor-
tant enough to emphasize.
III. DESCRIPTION
This SPERIAN air purifying respirator consists of a half
mask facepiece and breathing tube assembly, and a
plenum with two threaded connectors for attaching par-
ticulate filters, gas or vapor cartridges, and cartridge/
filter combinations as required for specific contaminant
protection. The plenum is designed to be clipped to the
user's belt.
Copyright Sperian Respiratory Protection USA, LLC
©
April 2008 All Rights Reserved
zP/N 270094 REV C 03/09
Belt Mounted Half Mask
NOTE
WARNING
The employer is responsible for es-
tablishing that this respirator is suit-
able for the user's applications.
This respirator must be worn and used
as specified in SPERIAN's instructions.
This respirator does not supply oxy-
gen and must not be used in atmo-
spheres containing less than 19.5%
oxygen by volume.
Before entering a hazardous envi-
ronment while wearing SPERIAN
equipment, you must conduct safe,
scientific tests to determine if the
environment could render the equip-
ment unsafe. Results of this testing
should be well documented. Seek the
help of a certified safety professional
or industrial hygienist. DO NOT USE
this equipment if the user would be
endangered in any way through envi-
ronmentally induced degradation of
the materials in the apparatus.
Do not use this respirator in environ-
ments where the concentrations of
contaminants are unknown, or where
the atmosphere is immediately dan-
gerous to life or health (IDLH). IDLH
atmospheres are defined as:
1.
Those which the wearer could not
breathe for short periods.
2.
Those from which the wearer
could not escape without the aid
of the respirator.
3.
Those which have an immediate or
delayed adverse effect on health.
NEVER use this respirator without ap-
propriate SPERIAN cartridges/filters
identified on the NIOSH approval label
securely threaded onto the plenum.
Always read cartridge labels prior to
use to be certain that you have car-
tridges and/or filter that will provide
the required protection. Cartridges/
filters labeled for protection against
particulates only shall not be used
for gases/vapors, and cartridges/
filters labeled for protection against
gases/vapors only shall not be used
for particulates.
AN ISO 9001
REGISTERED
COMPANY
WARNING
Sperian Respiratory Protection USA, LLC
3001 South Susan St., Santa Ana, CA 92704
Toll-Free 888.APR.SCBA or 714.545.0410
Fax 714.850.0299
www.sperianprotection.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sperian 2000 Series

  • Page 1 NEVER use this respirator without ap- propriate SPERIAN cartridges/filters III. DESCRIPTION identified on the NIOSH approval label This SPERIAN air purifying respirator consists of a half securely threaded onto the plenum. mask facepiece and breathing tube assembly, and a • Always read cartridge labels prior to...
  • Page 2 APR 2000 Belt-Mounted Half Mask WARNING─continued WARNING─continued • Immediately return to a non-contam- • All persons using this SPERIAN inated area if: breathing apparatus must be made You taste or smell contaminants, aware of its limitations. We cannot or your eyes, nose, or throat be- be responsible for any damage to come irritated;...
  • Page 3: Parts List

    Connector Tube which these respirators MUST NOT be 260054 Plenum (includes 2 each of 11 used. This list is far from complete. and 12) Contact SPERIAN for information on other materials. 360008 Threaded Connector 140001 Inhalation Valve (Pkg. of 6)
  • Page 4: Use Instructions

    APR 2000 Belt-Mounted Half Mask Ensure that you have the correct filter and/or Acroline Methanol chemical cartridge for the specific contaminants Aniline Methyl Bromide in your work area. If you are not sure, contact your supervisor or safety professional. Arsine Methyl Chloride Thread the P100 or HEPA filters or chemical car- Boron Hydrides...
  • Page 5 The facepiece should collapse on becomes objectionable to the user. SPERIAN recom- your face without leaking. The plenum should mends that filters be replaced at least daily, more often if also collapse slightly.
  • Page 6: Maintenance

    Silicone and rubber parts of the respirator loss of elasticity, or deterioration from age, heat, may be cleaned between washings with or contamination. SPERIAN Mask Wipes, P/N 140096 or P/N Remove the exhalation valve cover and carefully 140082. inspect the valve for cracks, tears, wrinkles, cuts, •...
  • Page 7 SPERIAN-certified technicians at your facility, consult your SPERIAN distributor for the CAUTION one nearest you. The maximum storage temperature for this Threaded Connector Replacement (Facepiece Only) device is 140°F (60°C).
  • Page 8 www.sperianprotection.com...