Table of Contents
Advertisement
Offset parame-
ter
Description
Index
Data type
Length
Access
Value range
0 = No error in the connection to the
IO-Link master
1 = Timeout during establishing the
connection to the IO-Link master
Default value
Unit
EEPROM
Offset parame-
ter
Description
Index
Data type
Length
Access
Value range
Additional error code in accordance with the IO-Link interface specifi-
Default value
Unit
EEPROM
EtherNetIP:
To access the ISDU parameters of an IO-Link device connected to the IO-Link master, an object, an in-
stance and an attribute must be specified in the object-based "Common Industrial Protocol" (CIP). The ob-
ject 0x10B must be selected for this purpose. The instance represents the IO-Link index number. The at-
tribute represents the IO-Link subindex number. Refer to the IO-Link device description for the index and
subindex. The service code is used to select the IO-Link master and port on which the service is to be exe-
cuted.
The service codes are assigned as follows:
Master # Port #
Master 1 Port 1
Master 1 Port 2
Master 1 Port 3
Master 1 Port 4
Master 2 Port 1
Master 2 Port 2
Master 2 Port 3
Master 2 Port 4
EN-US · 30.30.01.02237 · 00 · 04/20
10206 (0x27DE)
Request: Error Code
bool
1 bytes
10209 (0x27E1)
Response: Additional Error Code
Read only
Service code
0x11
0x12
0x13
0x14
0x21
0x22
0x23
0x24
Response: Error Code
—
Read only
Error code in accordance with the IO-
Link interface specification
—
—
no
—
uint8
1 bytes
cation
—
—
no
Component Functions
10208 (0x27E0)
uint8
1 bytes
75 / 94
Advertisement
Table of Contents
