Hidden Features - Hunter X-CORE XC-2 Quick Start Manual

Feature
PROGRAMMABLE
SENSOR OVERRIDE
CYCLE AND SOAK
DELAY BETWEEN
STATIONS
SOLAR SYNC® DELAY
HIDE PROGRAMS
CLIK-DELAY
TOTAL RUN TIME
EASY RETRIEVE®
TOTAL RESET
QUICKCHECK™
Built on Innovation
®
Where Found
Hold – and turn to START TIMES.
Hold + and turn to RUN TIMES.
Enter Cycle, press PRG to set
Soak.
Hold – and turn to RUN TIMES.
Hold – and turn to SOLAR SYNC.
Hold – and turn to WATER DAYS.
Hold + and turn to OFF.
Turn to RUN TIMES. Press ◄
when station 1 is shown, PRG to
select other programs.
Hold + and PRG to Save. Hold –
and PRG to Restore.
Hold PRG and press RESET
button.
+, –, ◄, ► together, then +.
Description
Sets individual stations to ignore sensor shutdowns. Select stations with
◄ or ►, (use +/–) to change to OFF to ignore sensor.
Sets max time a station can run at once, and minimum time it must wait
before another cycle. Divides run time into segments to prevent runoff.
Inserts a delay (seconds or minutes) between stations in a run time, for
slow valves or recharging tanks.
Allows the user to postpone seasonal adjustment changes from being
made by Solar Sync for up to 99 days. Use the +/– to increase/decrease
the number of days the delay should run.
Use +/– to change from 4 to 1 to hide extra programs. Option 1 will show
only program A, Start Time 1. Option 4 will show all programs and
Start Times.
Set number of days for watering to remain off, after sensor has been
activated and restored.
Calculates and displays total of all run times in a program Start Time.
Saves all program information to restore at a later time.
Returns to factory defaults and erases watering schedule and settings.
Checks all stations for wiring problems.

Hidden Features

7