Honda BF40D Manual page 142

32ZZ4641.book 142 ページ ２０１８年８月３日 金曜日 午前９時４４分
MAINTENANCE
3. Turn the hexagon part to
counterclockwise and separate the
strainer cup from the filter body.
4. Thoroughly clean the strainer cup
and fuel strainer.
If the fuel strainer is clogged,
replace it with a new one.
142
FILTER BODY
O-RINGS (Replace)
FUEL STRAINER
FLOAT (red ring)
STRAINER CUP
HEXAGON PART
5. Install the fuel strainer, O-rings and
float. Use new O-rings.
Re-assemble the filter body and the
strainer cup.
TIGHTENING TORQUE:
3.0 N·m (0.3 kgf·m, 2.2 lbf·ft)
Align the center of the two fuel tubes and
the arrow of the suspension strap rib
6. Install the suspension strap to the
fuel filter assembly as shown
above.
7. Reinstall the fuel filter assembly
and suspension strap in the original
position.