Honda BF40D Manual page 109

32ZZ4641.book 109 ページ ２０１８年８月３日 金曜日 午前９時４４分
G type
1. Move the tilt lever to the FREE
position and raise the outboard
motor as far as it goes by holding it
by the grip of the engine cover.
2. Move the tilt lock lever to the
LOCK position and lower the
outboard motor slowly.
3. Move the tilt lever to the LOCK
position.
4. To tilt down, move the tilt lever to
the FREE position, and move the
tilt lock lever to the FREE position
while lifting the outboard motor to
the designated position and move
the tilt lever to the LOCK position.
(R3 type) (DUAL TYPE)
POWER TRIM/TILT SWITCH
(LEFT) (RIGHT)
After tilting down the outboard
motors, adjust the trim angle of the
right and left outboard motors.
OPERATION
109