Advertisement
Drawer (T)
T3
MAKE SURE ROLLER
IS ON THE BACK
STEP 2
Slide T5 into the grooves in T3
and T4. Be sure to push T5 all
the way forward so it meets T1.
(See Figure 2)
T3
T2
Figure 3
STEP 3
Insert
short
wood screws (4X)
into the pre-drilled holes in T5,
tighten screws. (See Figure 3)
Part List
T1.
Front Part
3 pcs.
T1
T4
T2
Figure 1
T1
T5
T4
T2.
Back Part
3 pcs.
Assembly Instructions 6/6
T3
Figure 2
STEP 4
Assemble Pull Handle with
machine screws. (See Figure 4)
Tighten all screws used in drawer assembly.
T3.
Side Part
3 pcs.
Attach T1 to T3 and T4,
using a
Phillips
and
long
wood screws (4X),
tighten halfway.
Attach T2 to T3 and T4 using
long
wood screws (4X),
tighten halfway. (See Figure 1)
T1
T5
T2
T4.
T5.
Side Part
Base Part
3 pcs.
3 pcs.
STEP 1
screwdriver
T4
Figure 4
Advertisement
