Advertisement
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 1
Attach 2X Magnets to Top (A) by
using Wood Screws (for Magnet)
into the pre-drilled holes.
(See Figure 1)
Wood Screw (for Magnet)
Magnet
K
Figure 2
STEP 2
Attach Arms (K) to Side Panel (B) with Head Cap Bolts. (See Figure 2)
Assemble Side Racks (M), (N), Base Rack (O) and Rack (P), then attach to Side Panel (C)
with Head Cap Bolts. (See Figure 3)
Head Cap Bolt
K
B
Assembly Instructions 2/6
Stopper
A
C
B
Head Cap Bolt
N
P
O
C
M
Figure 3
Figure 1
Advertisement
