Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
E.
F.
Back Panel
Back Upright
3 pcs.
2 pcs.
K.
Arm
2 pcs.
L.
Towel Bar
1 pc.
Hardware List
Hex Wrench
1 pc.
Caster
2 Locking
Small
2 Non-Locking
Hex Wrench
4 pcs.
1 pc.
Tool(s) required for assembly: Phillips screwdriver
Home Styles Customer Service: www.homestylesfurniture.com,
servicedesk@homestylesfurniture.com,
4511-95
Kitchen Cart
Side Panel
W.
Front Rail
1 pc.
G.
Back Rail
1 pc.
H.
Back Rail
1 pc.
N.
P.
Rack Side
Rack
1 pc.
1 pc.
M.
O.
Rack Side
Rack Base
1 pc.
1 pc.
M6x38
Magnet
Head Cap Bolt (long)
2 pcs.
4 pcs. (+1 extra)
M3x16
Wood Screw
M6x25
for Magnet
Head Cap Bolt
4 pcs. (+1 extra)
4 pcs. (+1 extra)
B.
1 pc.
I.
Front Rail
2 pcs.
Q.
Door
1 pc.
S.
Shelf
2 pcs.
M3.5x16
Wood Screw (short)
24 pcs. (+1 extra)
M6x12
Head Cap Bolt
for Caster
16 pcs. (+1 extra)
888-680-7460, 877-831-0319
C.
Side Panel
1 pc.
J.
Base
1 pc.
U.
Leaf
Support
R.
1 pc.
Door
1 pc.
T.
Drawer
3 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
M3.5x25
M3.5x25
Wood Screw (long)
Flat Head Screw
24 pcs. (+1 extra)
3 pcs. (+1 extra)
M3x16
Wood Screw
Adjustable Pin
for Leaf Support
6 pcs. (+1 extra)
8 pcs. (+1 extra)
D.
Middle Panel
1 pc.
V.
Leaf
Support
1 pc.
Knob
5 pcs.
M4x25
Machine Screw
5 pcs.
Advertisement
Related Manuals for Homestyles 4511-95
Summary of Contents for Homestyles 4511-95
- Page 1 4511-95 Kitchen Cart IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
- Page 2 Assembly Instructions 2/7 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ Keep Hex Wrench as the bolts may need to be tightened in the future.
- Page 3 Assembly Instructions 3/7 STEP 4 Attach Back Rail (G) to Side Panel (C), then flip Locks. (See Figures 1 and 2) Attach Back Uprights (F) to unit. Slide Back Panels (E) into position. Attach Back Rail (H) to unit, Lock then flip Lock.
- Page 4 Assembly Instructions 4/7 STEP 6 Head Cap Bolt for Caster Non-Locking Caster Attach Casters to unit with Head Cap Bolts for Caster into pre-drilled holes Locking Caster with Locking Casters at front. (See Figure 4) Note: Arrow label indicates front of unit. Figure 4 Arrow label at front Wood Screw for Magnet...
- Page 5 Assembly Instructions 5/7 STEP 8 Turn unit over to its upright position. Attach Middle Panel (D) and Front Rails (I), (W) to unit, then flip Locks. Insert Wood Screws (short) into pre-drilled holes in unit, then tighten. Slide Towel Bar (L) into position. Lock Wood Screw (short) Figure 6...
- Page 6 Assembly Instructions 6/7 Drawer (T) Bottom STEP 10 Attach Drawer Front (T1) and Drawer Back (T2) to Drawer Side (T3) with Wood Screws (long). Attach Drawer Side (T4) to unit Wood Screw (long) with Wood Screws (long). Roller at back STEP 11 Wood Screw (short) Slide Drawer Bottom (T5) into groove.
- Page 7 Assembly Instructions 7/7 STEP 13 Insert Adjustable Pins into side panel and middle panel at desired level. (See Figure 7) Place Shelves (S) into position. Attach Doors (Q) and (R) by sliding door hinges into side panel hinges. Figure 7 (See Figure 8) Attach Knobs to Doors (Q) and (R) with Machine Screws.
- Page 8 Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customerservice/replacement-parts Home Styles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.com,...
Need help?
Do you have a question about the 4511-95 and is the answer not in the manual?
Questions and answers