Advertisement
STEP 5
Attach base unit to
unit with Head Cap Bolts (long).
Figure 7
L
Wood Screw
(short)
STEP 6
Turn the unit to its'
upright position.
Slide Towel Bar (L)
into place.
Attach Front Pieces (I) and Middle Panel (D)
to unit from Step 3, then filp the Locks.
Insert Wood Screws (short) into the pre-drilled holes of Back Stretchers (G) and (H)
and tighten.
Attach Leaf Supports (U) and (V) to unit with Wood Screws (for Leaf Support) (See Figure 7).
Assembly Instructions
Head Cap Bolt (long)
Wood Screw
(for Leaf Support)
U
D
I
G
I
H
4/6
V
Advertisement
