Table of Contents
Advertisement
1. General Information
General information for the probe is provided below.
1-1. Intended use
This probe is intended for use by trained personnel (doctor, sonographer,etc.) for the diagnostic ultrasound evaluation
during robotic/non-robotic intra-operative and laparoscopic procedures.
Please refer to the ultrasound diagnostic instrument instruction manual used with this probe for the probe intended use
information.
Regarding with the connectable instrument, please refer to section 2-1. Specifications of this manual.
Warning
Do not use this equipment for other than its intended use.
Otherwise it could cause burns or other injuries to the patient or operator.
1-2. Classification of ME equipment
This probe is classified as follows according to IEC60601-1.
Please refer to the section 2-1 for the range of applied part, the part treated as applied part, and the range of IPX7.
• Classification based on the degree of protection against electric shock ........ Type BF applied part
• Classification for protection against ingress of liquids .................................. IPX7 (Watertight equipment)
• Operation mode ............................................................................................... Continuous operation
• Method of sterilization .................................................................................... Refer to the separate instruction manual
1-3. Standard components
The standard components of L51K probe are as follows.
L51K Probe ··························································· 1 set
Storage case ··························································· 1 set
Instruction Manual
• Specification (MN1-6268) ······································· 1 copy
• Safety (MN1-5984) ··············································· 1 copy
• Cleaning, Disinfection and Sterilization (MN1-6000) ······ 1 copy
"Cleaning, Disinfection and Sterilization"
-1-
MN1-6268 Rev.2
Hide quick links:
Advertisement
Table of Contents
