4-2 [Movement]
A ll data managed by a computer are moved to a diff erent computer and managed.
① Close the application on the data movement origin computer.
② R ight-click the icon on the data movement origin computer, click on [Open
File Location (I)] and open Explorer.
* T he same can be performed from the start menu [All Programs] -> [SEIKO] -> right-click [S06 Stopwatch].
③ C opy the following fi le and all the folders in the SEIKO S06ssw folder to a
USB memory, etc.
S06ssw.dat (Application system fi le)
SSW-01
(Stopwatch data folder)
SSW-02
(Stopwatch data folder)
⁝
(The number of folders diff ers according to the number of registered stopwatches)
* Backup the data before they are moved, as necessary.
58
5 Troubleshooting
Symptom
The application does not start.
Mixed languages are displayed with the
application.
Data is not transferred from the stopwatch. There is no measurement data.
Time cannot be synchronized.
The time of stopwatch has deviated.
The CSV fi le cannot be processed.
60
Cause
The application fi le may be broken.
The OS language and the application language
are diff erent.
There is no data which have not been transferred yet.
Display on the stopwatch has disappeared.
The stopwatch is measuring time.
The stopwatch is not fully charged.
A reader other than the NFC Reader [SVAZ015]
is being used.
Synchronize the time of stopwatch to the time
of computer on the application is not checked.
The time of computer has deviated.
The fi le is saved as Read Only for data protection.
④ Close the application on the movement destination computer.
⑤ O pen Explorer on the movement destination computer, following the same
procedure as ② .
⑥ I f data are stored by the application on the data movement destination
computer, delete the following fi le and all the folders.
S06ssw.dat (Application system fi le)
SSW-01
(Stopwatch data folder)
SSW-02
(Stopwatch data folder)
⁝
(The number of folders diff ers according to the number of registered
stopwatches)
* E ven if the data are not stored, delete the [S06ssw.dat] fi le on the movement
destination.
⑦ Copy the data copied in ③ into the SEIKO S06ssw folder on Explorer.
⑧ Restart the application.
* T he tab number of the stopwatch is the number registered by the application on the
movement origin computer.
Uninstall and reinstall the application.
Install the application in the same language as the language of the OS.
Transfer data after measuring time.
Data which have already been transferred can be transferred from Reloading.
The stopwatch is either in PS mode or SL mode. Press any button to start the stopwatch.
Undefi ned data, such as time being measured, cannot be transferred. After completing the
measurement, transfer the defi ned data.
Charge the stopwatch, and then transfer the data. * The reader has no charging function.
Use the dedicated NFC Reader [SVAZ051] (separately sold).
Check Synchronize the time of stopwatch to the time of computer.
Correct the time of computer or adjust the time of the stopwatch itself.
Save the fi le with a diff erent name and remove Read Only status.
Measure
59
61