Electronics Configuration; Electronics Module - Dell PowerEdge R320 Planning, Installation And Service Manual

Model
number
MZ-
PCSV61
MZ-
PCEH02
MZ-
PCEH06
EP-
COA2K8
EP-
COAR28
EP-
COAS16
2.2.2

Electronics configuration

The Dell R320-based server is approved for installation in the Honeywell 1000 mm deep LCN cabinet
only, using the Sliding ReadyRail II kit included in the purchase of the server.
2.2.3

Electronics module

The tables in this section provides the electronics module for the Honeywell-based Dell R320 server
platforms, which includes MLK and pre-MLK servers.
Typical operating power requirements
Description
Electronic assembly
Maximum operating power requirements
Description
Electronic assembly
Description
Intel Xeon E5-2430V2 2.50 GHz, 15M Cache/8 GB RDIMM ( 2x4 GB)/146 GB
or 300 GB 15K RPM Serial-Attach SCSI 6 Gbps 2.5 in Hot plug Hard Drive
(QTY 4)/H710mini Controller (RAID 5 configuration)
146 GB or 300 GB 2.5" 15K RPM SAS HDD to use as a Hot Spare (if the hot
spare is required, then you need to buy it as it is not supplied with the standard
configuration-obsolete)
300 GB 2.5" 15K RPM SAS HDD to use as a Hot Spare (if the hot spare is
required, then you need to buy it as it is not supplied with the standard
configuration)
Microsoft Windows Server 2008 (32-bit) COA
Microsoft Windows Server 2008 R2 COA
Microsoft windows Server 2016,64Bit COA
DC power AC voltage
N/A
DC power AC voltage
N/A
120 (90-132) Vrms
240 (180-260) Vrms
120 (90-132) Vrms
240 (180-260) Vrms
- 12 -
Chapter 2 - Planning
AC RMS current AC power
0.91A 88W
0.47A 89W
AC RMS current AC power
1.68 163W
0.87 160W