Configuring Controlnet Interface Card; Installing Controlnet Card Inside Magma Chassis - Dell PowerEdge R320 Planning, Installation And Service Manual

ATTENTION
TC-PCIC02: Controlnet Network interface can be connected toDell PowerEdge R320
serverusing Magma PCIe to PCI converter. For more information on "How to connect using
Magma Converter" refer to the Magma PE3R Installation Instructions available at the following
Honeywell Process Solutions support website.
https://www.honeywellprocess.com/library/support/Documents/Experion/Magma_Installation_
Instructions_HWDOC-X279-en.pdf
4.3

Configuring ControlNet interface card

You can configure a ControlNet interface card using the Magma PE3R PCie to PCI converter box.
1. For more information on the Magma PE3R PCie to PCI converter box, log into
honeywellprocess.com.
2. Enter your user name and password.
3. Go to the Product Support section.
4. Search for Magma PE3R instructions.

Installing ControlNet card inside Magma chassis

l
4.3.1 Installing ControlNet card inside Magma chassis
Refer to the Magma PE3R Installation Instruction available at the following Honeywell Process
Solutions support website before installing the third party hardware cards inside Magma chassis.
https://www.honeywellprocess.com/library/support/Documents/Experion/Magma_Installation_
Instructions_HWDOC-X279-en.pdf.
- 42 -
Chapter 4 - Operation