Setting The Clock; Radio Operation - Aiwa CT-X429 Operating Instructions Manual

—
SETTING THE CLOCK
RADIO OPERATION
1,3
DISP
2
1~
You can turn the unit on by pressing any button
except a, =, + and ~ on the front panel.
1
2
3
With the unit on, press and hold SELfor
more than 2 seconds until the clock
indication appears.
Press TUNE Y to set the hour.
Press TUNE
A
to set the minute.
Press SEL to start working the clock
from O second.
Havingthe clockdisplayedwhile in Radio, Tape
Play or CD Changer Play mode
Press DISP.
To return the unit to its former display, press
DISP again.
1
2
3
4
Press BAND to turn the radio on.
The radio frequency appears.
Press BAND
again to select the band
from among F1 (FM1 ), F2 (FM2), F3
(FM3), Al (AM1) and A2 (AM2).
The band indications appear cyclically in
order.
F1, F2 and F3 share the same frequency
range.
Al and A2 share the same f requency range.
Band
Frequency
indication
indication
Press (more than 2 seconds) either
TUNE 7 or TUNE A to tune in the desired
station.
The unit starts scanning and tunes in a station
automatically (seek tuning).
Press TUNE 7 to decrease and TUNE
A
to
increase the frequency.
Press the button again to cancel seek tuning.
Repeat the procedure until the desired station
is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE T or TUNE
A,
the frequency <
decreases or increases step by step.
Adjust the volume with +/-.
5
ENGLISH