Download  Print this page

Presetting Stations - Aiwa CT-X438 Operating Instructions Manual

Stereo car cassette receiver.
Hide thumbs

Advertisement

Note
The unit turns on in the last selected mode when
you turned off the unit with the exceptions of
pressing the following buttons.
Pressing TAPE turns on the unit in Tape Play
mode.
c Pressing CD turns on the unit in CD Changer
Play mode.
Pressing BAND turns on the unit in RarJo mode.
PWR
TUNE Y/A
LO
Toturnthe radiooff
Press PWR. The frequency indication goes off. If
you insert a cassette,
the radio mode will
automatically be inactivated as well.
TheLO(local/OX)button
You
can use Local mode when you wish to tune
in only strong signal stations during seek tuning.
In Radio mode, press LO to select Local mode.
The "LO indicator lights up.
Press LO to cancel Local mode and switch to
the DX (distance) mode.
The "ST" (stereo) indicator lights up when the
tuned station is broadcasting in sterao and the
reception condition is good.
PRESETTING STATIONS
1
2
Press BAND to select a desired band
from smong F1 (FM1), F2 (FM2), F3
(FM3) snd AM.
Press and hold A.ME for more than 1.5
seconds to sctivste the automatic
preseting function.
The six strongest available stations will be
stored in memory onthepreset station buttons
1 to 6 in order of their signal strength. The "A
MEM indication appears while the unit is in
this mode.
Use this function to automatically preset up to 6
stations each for F1, F2, F3 and AM (up to a total
of 24 stations).
When auto memory is completed, the preset
stations are automatically scanned in order.
To stop auto memory, press A.ME again.
To
check thepresetstations(presetscan)
If you wish to check the preset stations, press
A.ME for less than 1.5 seconds. The preset
stations stored in memory will be tuned in for 5
seconds each in order.
To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
mrml
ENGLISH
6

Advertisement

Table of Contents

   Related Manuals for Aiwa CT-X438

This manual is also suitable for:

Ct-x438m

Comments to this Manuals

Symbols: 0
Latest comments: