Table of Contents
Advertisement
Back
A
A. +12V DC
Connect the provided 12V DC power supply's cord and tighten it in place
B. HDMI IN (1-4)
Connect to the output of HDMI source(s) to the input(s) you require
C. HDMI OUT
Connect to the input of an HDMI display or other similar device
D. IR Receiver PWR
• ON position: IR receiver port supplies 12V power
The unit can be controlled through an IR receiver (sold separately) in the ON
position
• OFF position: IR receiver port does not supply 12V power
The unit can be controlled with a standard mono cable from a control system in the
OFF position
E. IR EXT.
IR extension port Connect an IR extension cable, control cable, or external IR receiver
(not included)
When connecting to an unpowered IR receiver or a control device, ensure that the IR
receiver power switch is in the OFF position
When connecting to a powered IR receiver, ensure that the IR Receiver Power Switch is
in the ON position
F. RS-232
Connect to an RS-232 control device
B
6
C
D
E
C
Advertisement
Table of Contents
