Installation Instructions - Faro LISBOA Manual

INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA
SICHERHEITSHINWEISE / VEILIGHEIDSINSTURCTIES INSTRUZIONI DI SICUREZZA
CAUTIONS ENGLISH
Read entire booklet carefully before beginning installation and save these instructions.
To reduce the risk of personal injury, attach the fan directly to the support structure of the
building according to these instructions, and use only the hardware supplied.
To avoid possible electrical shock, before installing your fan, disconnect the power by
turning off the circuit breakers to the outlet box and associated wall switch location.
All wiring must be in accordance with national and local electrical codes. If you are
unfamiliar with wiring, you should use a qualified electrician.
To reduce the risk of personal injury, do not bend the blade attachment the system when
installing, balancing or cleaning the fan. Never insert foreign objects between rotating fan
blades.
The fan blades cannot be installed lower than 2,3m from the floor.
To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the
lead wires.
1. Attach the base plate to the ceiling.
1
Round Hole
2. Installation with down rod
2.1. Insert the down rod (1) through canopy (2) and pass the cables from the motor through
canopy and down rod. Insert rod in the superior part of the motor (3) and insert
connector pin (4) through the holes crossing the motor and the down rod as indicated
in the illustration. Next insert the stop pin (5) to secure the connector pin and tighten
the screw (6) against the down rod so that all holds well.
2

INSTALLATION INSTRUCTIONS

Base plate
Slot
Clamp
Pin
Fixation
setscrew
Faro
- 16 -