Connecting To A Spring-Terminal Connector - National Instruments NI 9375 Getting Started Manual
16 di/16 do, 30 vdc, 7 ms sinking di, 500 ms sourcing do
Hide thumbs
Also See for NI 9375:
- Getting started manual (21 pages) ,
- Getting started (11 pages) ,
- Getting started (11 pages)
Table of Contents
Advertisement
Connecting to a Spring-Terminal Connector
What to Use
•
NI 9375 spring-terminal connector
•
0.08 mm
conductor wire with 7 mm (0.28 in.) of insulation stripped
from the end
•
Flathead screwdriver with a 2.3 mm x 1.0 mm (0.09 in. x
0.04 in.) blade, included with the NI 9375
What to Do
Complete the following steps to connect wires to the spring-
terminal connector.
hnology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www
2
2
to 1.0 mm
(28 AWG to 18 AWG) copper
NI 9375 Getting Started Guide | © National Instruments | 15
Advertisement
Table of Contents
