The Control Panel - Keithley DAC-02 User Manual

The Control Panel is a utility program (CTL02W.EXE) for testing the
functions of your DAC-02 boards in the Windows environment. This
program is a part of the DAC-02 software package.
To use the Control Panel, perform the following steps:
1. Start the Control Panel from the Windows environment by clicking on
Run in the File menu of the Program Manager and making the
following entry in the Command Line dialogue box:
path\ CTL02W
Use the Browse option to determine the path.
2. To configure the base address and DAC output ranges, select Config
from the Control Panel menu.
3. To set up and perform an analog output operation, select Output from
the Control Panel menu. When the Control Panel displays the Output
menu, select Single to display the Single Point Output or Multiple to
display Multiple Point Output setup panel for your entries.
4. To obtain information on the setup and performance of an operation,
use the Help option in the Control Panel menu. To obtain information
on DAC-02 board functions and parameters, refer to Chapter 2.
5. When you finish using the Control Panel, select Close to terminate the
program.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

The Control Panel

5
5-1