Installing The Board - Keithley DAC-02 User Manual

Installing the Board

Caution: Installing or removing a board while power is on can damage
your computer.
Use the following steps to install a DAC-02 board in an accessory slot of
your computer:
1. Turn off power to the computer and all attached equipment.
2. Remove the computer chassis cover.
3. Select an unoccupied accessory slot, and remove the corresponding
blank plate from the I/O connector panel.
4. Insert and secure the board in the selected slot.
5. Replace the computer cover.
You are now ready to attach accessories or other external connections to
the board, as described in Chapter 4.
3-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com