Table of Contents
Advertisement
2.3
MOUNTING THE PANEL AND SUPPLYING POWER
The control panel houses all the electronics outside of the detectors themselves. When
choosing a location for the panel and providing power to it, keep these things in mind:
• Mount the panel near the console. In case of a fire, you will need to access the panel
to identify the affected zone and access the reset switch. If the panel cannot be close
to the console, it does need to be within eyeshot.
• Power to the panel needs to be dedicated rather than feeding off the power supplied to
another device.
Note: If you have a Moisture Mirror X system in your gin, you have the option of being
able to reset Argus alarms from your Moisture Mirror X with the addition of an Argus
Interface Panel. In this case, the above rules do not necessarily apply. If you have any
questions, please contact a Samuel Jackson representative. For more information, see
Section 6 of the Moisture Mirror X manual.
Argus Installation and Resource Guide
INSTALLATION
13
Advertisement
Table of Contents
