Docomo SO-51A Instruction Manual page 228

Charging
■
Phenomenon
Cannot charge Check if the adapter's power
･
(The notification plug is correctly inserted to a
LED does not power outlet or accessory
turn on, or the socket.
icon does not Check if the adapter and the
･
indicate charging
terminal are set correctly.
status) When using an AC adapter
･
(optional), check if the Type-C
plug of the AC adapter is
connected to the terminal
correctly.
When using the USB cable A to C
･
02 (optional), check if a PC is
turned on.
If you execute calls,
･
communications or other
function operations for a long
time while charging, the terminal
may become hot and the
notification LED turns off
(charging stops) or battery level
may become low. In this case,
wait until the temperature of the
terminal drops and charge again.
The notification When the battery level is low,
･
LED blinks in red
charge the battery.
and the terminal
cannot be
operated
Cause and handling
P.41
→
P.41
→
P.39
→
Phenomenon
Battery Care For Auto setting, Battery Care
･
charging does charging does not start unless its
not start learning is complete from
finding regularity in your
charging habit. Set Custom so
that you can start Battery Care
charging at specified time zone.
P.40
→
Cannot charge If you remove charging
･
fully equipment during Battery Care
charging, the terminal may not
be fully charged.
To charge fully, switch to normal
charging.
Cause and handling
P.40
→
Appendix
226