Daily Maintenance - Brother GT-3 Series Maintenance Manual

Shaking White Ink
>
The White ink contains titanium dioxide which helps provide vibrancy.
This will separate after being stationary for more than eighteen hours.
Dull prints will result if the ink is not agitated before use.
Shake the white ink cartridges side to side and tip end over end for 45 seconds.
+
> No matter if you will have to do the
Daily Cleaning White
>
If the printer has
day before...
minimum
+
If the printer has
18H
White Agitation
>
If the printer has printed with white ink a minimum of 15 T-shirts the day
before...
minimum
-
If the printer has printed with white ink within the last eighteen hours...
18H
> TIP
+
&
NZC PHC
DCW
not printed with white ink a minimum of 15 T-shirts the
not printed with white ink within the last eighteen hours
>
Then the
>
Then the
After performing the daily maintenance on the white ink,
a nozzle check should be printed
or WA , you must
must be performed after the
DCW
could be performed after the
WA

DAILY MAINTENANCE

SWI BEFORE !
SWI
SWI
minimum
minimum
2