Environmental Conditions - Brother GT-3 Series Maintenance Manual

ENVIRONMENTAL CONDITIONS

> Mandatory Temperature & Humidity Requirements:
OVERVIEW OF GT3 MAINTENANCE
There are several maintenance procedures that
prompted basis to help keep your printer performing properly.
This guide will list the maintenance items that must be performed.
Please see the individual technical guide for each specific maintenance procedure for step by
step instructions.
FIRST BASIC STEPS
> HOW TO DO A NOZZLE TEST ?
Always place the Platen at level A
NZC
Menu > Test Print
Menu > Test Print
If not all the nozzles are firing, start a Head Cleaning
> HOW TO DO A PRINT HEAD CLEANING ?
Only a few nozzles missing, then
PHC
If more then 10 nozzles, perform
Perform a new Nozzle Test to check the result and redo if not all nozzles are firing
1
TEMPERATURE
MIN
18
MAX
30
C
> Nozzle Check CMYK > OK
> >
Nozzle Check White OK
HUMIDITY
%
°
°
must
to check colors on white paper sheet
to check whites on transparent or black sheet
Head Cleaning > Normal Cleaning
Head Cleaning > Powerful Cleaning
MIN
45
MAX
85
be performed on a daily, weekly, or
... and select PH + OK
... and select PH + OK