Target Setting - HDL Prism Lite Series User Manual

the light is turned off, and recall the status when turned on next time.
④ Mutual: only available when "Combination ON", "Combination OFF" or "Combination
ON/OFF" is selected. The ON/OFF status of the selected buttons are mutually exclusive.
(Only one group of exclusive relationships is available in Prism Panel.)
⑤ Linkage: only available when "Single ON", "Single OFF" or "Single ON/OFF" is selected.
Enter the button ID to link 2 buttons together for controlling one same target. The target
of the button with the smaller ID should prevail, while 0 means no button is linked to this
button.

3.3 Target Setting

Select the button for target configuration on the left, and click "Target" button on the right to
open "Target" window, as shown in Figure 3-3.
Notice:
The number of the target depends on the button mode, Only one target is supported except
"Combination ON", "Combination OFF", "Combination ON/OFF", "Double click/combined",
"Short/long press", "Short press/long jog".
HDL Automation Co., Ltd.
http://www.hdlautomation.com
Prism Lite Series Touch Panel User Manual
Figure 3-2 Button status setting
6