HDL Prism Lite Series User Manual page 12

The following 4 areas are included in this page, as shown in Figure 3-4:
① Device list: includes the devices that have been searched in Buspro Setup Tool.
② Device button list: shows the buttons of the device, and device can be selected above.
③ Template list
④ Template target list: includes the targets of current template.
To edit template, select the template in ③ and edit in ④. "Template" is only for saving the
targets temporarily in order for editing and is not assigned to any button.
User may add the target to the button in the following 2 ways:
① Drag the device in ① (red part) to corresponding button in ② (red part).
② Select the targets in ④ (multi-selection with Shift/Ctrl supported), right click and select
"Copy selected row". Return to Button Target Configuration Page (Figure 3-3) and right
click on target list and select "Paste", then click "Save".
HDL Automation Co., Ltd.
http://www.hdlautomation.com
Prism Lite Series Touch Panel User Manual
Figure 3-4 Target creation
8