ORiNOCO AP-9000R Hardware Installation Manual page 50

Step 1: Wrap vinyl tape in a half-lapped fashion, from the weatherproof connector end and continue wrapping down 3
inches onto the CAT5e cable.
a. Weatherproofing at the device end:
b. Weatherproofing at the antenna end:
(a)
Step 2: Wrap a second layer of vinyl tape in the reverse direction over the first layer of tape.
a. Weatherproofing at the device end:
b. Weatherproofing at the antenna end:
®
ORiNOCO AP-9200R - Hardware Installation Guide
(a)
(b)
(a)
(a)
Antenna Installation
(b)
(c)
(b)
(b)
50