Vaisala CWL100 Quick Manual page 9

When to use Info mode
Info mode can be very useful when you can physically access the data logger. The following
are the main use cases:
1. Wake up the data logger from radio power save without restarting it.
2. Determine the signal quality of the current access point connection. When the data logger
is connected to an access point, you can move the data logger around and monitor the
signal strength indicator
connection quality is shown only for the current access point connection.
3. Check the access point where the data logger is currently connected. You can determine
this from the channel number if you know the channel assignments of the access points.
4. Check the firmware version of the data logger without restarting it.
Turning on info mode
1
2
1. Open the plug that covers the service port.
2. Push the small button next to the service port using a pen or a small screwdriver.
3. Verify from the display that the text INFO ON appears briefly.
4. Close the plug over the service port.
that updates every 30 seconds in Info mode. Note that the
1 Service port (micro-USB)
2 Info button
9