Vaisala CWL100 Quick Manual page 5

CWL100 Quick Guide
This document is a quick guide for installation of CWL100 Cloud Wireless Data
Logger. Detailed instructions for its use are available in the
online help.
More information and downloadable documents are available from the product
page: www.vaisala.com/cwl100
CWL100 product overview
CWL100 is wireless, battery powered data logger. It is intended as a data collection point in a
Vaisala Jade Smart Cloud system. CWL100 supports Vaisala HMP63, HMP110, and HMP115
humidity and temperature measurement probes.
Do not modify the device or use it in ways not described in the product documentation.
CAUTION!
cannot send its measurement data to the Jade service. The connection must be
to a CA10 that is associated with the same cloud account as the CWL100. CA10
access points and CWL100 data loggers are associated with a specific cloud
account when they are purchased, so there is no need for the user to do any
device pairing.
Note that measured data can also be downloaded directly from the device. See
Jade online help for more information.
Table 1 Installation safety specification
Property
Operating environment
For use in wet locations
Operating temperature with alkaline batteries
Operating temperature with lithium batteries
Operating humidity
Operating altitude
Pollution degree
IP rating
Frequency band
Batteries
Power supply when powered through micro-USB connector
Supply voltage
Supply current
CWL100 requires a connection to a CA10 access point, otherwise it
jade.vaisala.com
Specification
Indoor use
No
+2 ... +60 °C (+35.6 ... +140 °F)
−20 ... +60 °C (−4 ... +140 °F)
0 ... 100 %RH, non-condensing
Max. 2000 m (6500 ft)
2
IP54
See type label on device
2 × AA sized, 1.5 V (LR6 or FR6)
5 VDC
Min. 100 mA
5