Agilent Technologies 81250 ParBERT Installation Manual page 19

ParBERT Components Overview
Tools for the E4809A clock module
CAUTION
Trigger Input Pod
Agilent 81250 ParBERT Installation Guide, May 2004
The E4809A clock module is shipped with two special tools for removing
or inserting the giga clock cable connectors.
Giga cable removal
tool, p/n E4809-23802
Figure 5 Giga Cable Tools
Never attempt to plug or unplug the giga clock distribution cables with
your fingers. The giga clock connectors do not tolerate any oblique
insertion or removal. Use the tools.
The trigger input pod is an option to the clock modules. It is used to
detect and react on external signals.
Figure 6 Trigger Input Pod
The trigger pod has eight TTL-compatible input connectors. An external
voltage applied to one of these lines can change or even terminate a
2 Introduction
Giga cable plug-in
tool, p/n E4809-23801
2-7