HP Envy 14 Maintenance And Service Manual page 45

Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the system board (see
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Remove the touchpad cable (2).
3. Remove the seven Phillips M1.6 × 2.0 screws (2) that secure the touchpad to the computer.
4. Remove the touchpad from the computer (2).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 24).
System board on page
23).
32),
Component replacement procedures
23).
35