Low Blue Light Mode (Select Products Only) - HP Envy 14 Maintenance And Service Manual

Low blue light mode (select products only)

Your computer display is shipped from the factory in low blue light mode for improved eye comfort and
safety. Also, blue light mode automatically adjusts blue light emissions when you are using the computer at
night or for reading.
WARNING!
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
Table 2-4 Display components and their descriptions
Component
(1) Internal microphones (2)
(2) Camera
(3) Camera light
(4) WLAN antennas*
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.
To access this guide:
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
Description
Record sound.
Allows you to video chat, record video, and record still images. Some
cameras also allow a facial recognition logon to Windows, instead of
a password logon.
NOTE: Camera functions vary depending on the camera hardware
and software installed on your product.
On: The camera is in use.
Send and receive wireless signals to communicate with wireless local
area networks (WLANs).
Low blue light mode (select products only) 7