Advertisement
D-DiGit® Gel Scanner Cleaning and Shipping Instructions - Page 6
3. Place bottom foam piece in box
The bottom foam piece is the piece with semicircular cuts
on the outer edge. Place the bottom foam piece in the box in
the orientation shown.
4. Place the scanner in the box
Place the scanner on its side into the bottom foam piece
with the top of the scanner toward the back of the box. The
plastic feet on the bottom of the scanner should fit into
grooves in the bottom foam piece.
5. Place the top foam piece on the scanner
Place the remaining foam piece in the box on top of the
scanner. The grooves on the top of the foam piece should
be toward the back of the box.
Advertisement
