Troubleshooting - AsVIVA T18 Manual

TROUBLESHOOTING

error
Communication Error
No speed sensor signal
Overflow protection
Storage fault
Moment overcurrent
Voltage low
Stall protection
Incline study fail
Motor break
Location fault
Voltage over
solution
1. Ensure the main wires are connected well.
2. Replace the main wire.
3. Replace the controller.
4. Replace the driver.
1. Ensure the speed wires are connected well.
2. Replace the speed wire.
3. Replace the driver.
1. Decrease the load.
2. Check the transmission parts and add oil.
3. Replace the motor.
4. Replace the driver.
1. Contact the support.
2. Replace the driver.
1. Replace the motor.
2. Check the trasmission parts and add oil.
1. Stop the workout. Check the external wire.
1. Ensure the motor wires are connected well.
2. Replace the motor.
3. Replace the driver.
1. Ensure the incline wires are connected well.
2. Replace the incline motor.
3. Replace the driver.
1. Ensure the motor wires are connected well.
2. Replace the motor.
1. Put the treadmill horizontally.
2. Replace the driver.
1. Stop the workout and check the external wire.
73