Electronic Loads; Schematic - Flex BMR474 ROA User Manual

8

Electronic loads

In order to perform load transient tests on the modules, up to 2 pcs of PuLS loads
can be connected to the output of the board.
The PuLS loads (ROA 128 5552) can be programmed for different transient loads
and waveforms, see the technical specification for further information. The PuLS
loads can be easily connected through the sockets. (see position 17 in Fig 1b)
9

Schematic

See schematic of Board ROA 128 6016 for more information.
28701-ROA1286016 Rev A
additional input
capacitors
Figure 3 Places for additional input/output capacitors.
2021/4/25
additional output
capacitors
10 (19)