1. Manuals
  2. Brands
  3. Redexim Manuals
  4. Spreader
  5. Rink 1500
  6. User manual and parts book

Redexim Rink 1500 User Manual And Parts Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User m
manual
®
Rink
k
Mod
del H1
1500
Seri
ial nu
umbe
Translat
ion of the o
ATTE
NTION:
IT IS O
OF THE U
CARE
EFULLY P
PRIOR TO
THE M
MACHINE
E SAFEL
and Pa
arts boo
r:
original op
perating ins
UTMOST
T IMPORT
O USING
Y AND T
1703 E
ok
Kwek
3709J
The N
T: (31
F: (31
E:
www.
structions
TANCE T
TO READ
G THE RI
NK H150
TO OBTA
AIN THE B
English 933.1
120.424
erijweg 8
JA Zeist
Netherlands
)306933227
7
)306933228
8
ver
rti-drain@re
edexim.com
redexim.com
m
D THIS U
USER MA
00 IN OR
RDER TO
BEST RE
ESULTS.
ANUAL
USE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rink 1500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Redexim Rink 1500

Summary of Contents for Redexim Rink 1500

  • Page 1 The N Netherlands T: (31 )306933227 F: (31 )306933228 rti-drain@re edexim.com Seri ial nu umbe www. redexim.com Translat ion of the o original op perating ins structions ATTE NTION: IT IS O OF THE U UTMOST T IMPORT TANCE T...

  • Page 2: Ec Declaration Of Conformity

    C DECLA ARATIO ON OF C CONFO RMITY nufacturer’s s (or Import ter’s) Certifi icate of Con nformity NK – Rolle er Spreade er H1500 e undersigne k Spezialm maschinen GmbH 279 Amtzell utschland/G Germany here eby declar res that th he machine e specified d below co...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS EC DECLARATION OF CONFORMITY..............2   SAFETY REGULATIONS ..................4   SAFETY REGULATIONS ..................5   BRIEF DESCRIPTION ....................6   TECHNICAL DATA ....................6   FIRST START-UP ...................... 6   OPERATION ......................6     BEFORE EVERY TRAVEL: ......................... 6  ...

  • Page 4: Safety Regulations

    SAFETY REGULATIONS  The RINK – Roller Spreader H1500 is exclusively designed for spreading fine-grain, loose gritting material such as sand, gravel, rubber granules or similar.  Any other use is considered to be improper. The manufacturer is not liable for any damages incurred as a result.

  • Page 5: Safety Regulations

    SAFETY REGULATIONS  The permissible support load of the towing vehicle must be observed.  Before starting the engine, check the immediate surroundings and ensure adequate visibility.  No persons should be within the danger zone of the spreader during operation because of the risk of injury from rotating parts and flying debris.

  • Page 6: Brief Description

    BRIEF DESCRIPTION The RINK – Roller Spreader H1500 is exclusively designed for spreading fine-grain, loose gritting material such as sand, gravel, rubber granules or similar. The spreading unit of the RINK – Roller Spreader H1500 is driven by a V-belt. The spreading thickness is adjusted via a mechanical slider.

  • Page 7: Attachment And Detachment

    Attachment and Detachment In order to obtain the best spreading results, the RINK – Roller Spreader H1500 must be mounted as parallel as possible to the ground. To do this, proceed as follows: When the screw (7) and the nut (8) are removed, the drawbar (1) can be pulled out to the required length.

  • Page 8: Driving

    Driving Operating controls The roller spreader and the slider are operated as follows: When in the lower position, the plug brake lever (1) is fully undone (V-belt is tension-free) and the roller spreader is not actuated. The slider is closed. The slider opening is adjusted by means of the R-clip (2).

  • Page 9: Spreading

    Spreading Setting the spreading thickness Set the desired spreading thickness whilst on a firm surface before starting to work. The spreading thickness or spreading quantity depends on the driving speed of the towing vehicle and the slider opening. This can be adjusted by setting the R-clip (2) to different positions. In order to spread as much material as possible, the R-clip (2) is pushed into the upper position (X) and the slider is fully open.

  • Page 10: Care And Maintenance

    CARE AND MAINTENANCE General Information Periodically check the RINK – Roller Spreader H1500 for faulty parts. Lubricate bearings with multi-purpose grease (after every 50 hours of operation) Remove the protective cover (1) by undoing the screws (2) in order to lube the bearings (3). (4) Bearings on both sides of the roller spreader (5) Bearings on both sides of the drive shaft (6) Bearings on both sides of the carrying axle...

  • Page 11: Belt Drive

    Belt drive The V-belt (3) can sag during the spreading process. The belt tension is readjusted by means of the tension spring (7) as follows: Turn the fixing screw (5) into the position (V) on the spring lever (6) and hook in the tension spring (7) The tension spring (7) can also be adjusted (W) on the belt tensioner (4).

  • Page 12: Problem Solving

    Problem solving Problem Cause Solution The roller spreader is Belt is faulty. Check the belt drive not moving (see page 11) Tension spring of belt drive is Replace tension spring (see page faulty. Slider does not open at Slider opening is too small. Change the position of the R-clip all or not enough.

  • Page 13: Special Equipment

    SPECIAL EQUIPMENT Extra brush (to work the spreading material into the surface) By installing the extra brush on the RINK – Roller Spreader H1500, material is spread and worked into the surface within one working cycle: Drill out the notches (Z) on the spreader using Ø 6.5 mm and mount the stop plate (2) with the screws (7) and nuts (10) supplied.

  • Page 14: Operating The Extra Brush

    Operating the extra brush Turn the extra brush downwards to work the spreading material into the surface. Raise the brush during transport and reversing ! Brush Up Bürste oben Brush Down Bürste unten Fig. 8: Operating the extra brush Replace the sweeper bar Depending on the load and operating time of the RINK –...

Table of Contents