Configuring The Initial Date And Time Setup - AIPTEK AHD-H23 User Manual

Turning On/Off Your Camcorder
• Open the LCD monitor or press and hold down the [Power Button] for 1 second to turn on the
camcorder.
• To turn off the camcorder, press and hold down the
monitor.

Configuring the Initial Date and Time Setup

• The time setting screen appears to allow you to setup date and time:
1. Touch Year, Month, Day, Hour, Minute, and AM/PM to set.
2. Adjust the numeric value by touching
3. Touch the [OK] icon to validate the setting.
4. Touch the Exit icon
Getting Started
• To record video: Press [Record Button] to record video. To stop recording, press it again.
• To pause recording:
again.
• To take a photo during video recording: When recording video, press [Photo Button] to capture the
image. The Picture in Video (PIV) icon (
• To take a photo: Press [Photo Button] halfway down until the focusing frame turns from white to green.
Then, press it fully down to take photo.
Focusing Frame: White
• To view stored videos and photos: Press [Playback Button] or touch
the Playback mode.
Operation
( ) to exit.
Press [Pause Button] to pause recording. To continue the recording, press it
[Power Button] for 1 second or close the LCD
/
) appears on the LCD monitor.
Focusing Frame: Green
8
Display Screen
on the screen to switch to
EN