Appliance Equipment - BOMANN SBS 7336 IX Instruction Manual

Unpacking the appliance
 Remove the appliance from its packaging.
 Remove all packaging material, such as foils, filler
and cardboard packaging.
 To prevent hazards, check the appliance for any
transport damage.
 In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".
Removing the appliance doors
If the device does not fit through the room or kitchen
door during transport, the appliance doors can be
removed.
WARNING:
The device must not be connected to the power
supply when removing the doors.
CAUTION:
Remove the device interior and put it safely aside.
NOTE:
 Ask another person to assist; the device is heavy
and must be tilted.
You need:
Phillips screwdriver and flat bladed

screwdriver.
 Loosen the upper hinge cover.
 Disconnect the plug connection.
 Dismount the upper door hinge.
 Carefully lift the door out of the lower door hinge.
Repeat the steps ↑ for the other appliance door and
continue ↓.
 Set both appliance doors safety aside.
 Tilt the device slightly backwards and block it in
this position.
 Unscrew the lower hinges.
 When the device is in position, install the device
doors in reverse order.

Appliance Equipment

Appliance overview
19