Step 1; Step 2 - modway EEI-2155 Quick Start Manual

EEI –2155
OFFICE CHAIR

STEP 1:

Please put the Chair Base (E) upside down on a carpeted or padded surface.
Insert 1pc of Castor (F) into the Chair Base (E) as shown by hand.
Repeat the same steps for the other 4pcs of Castor (F).

STEP 2:

Place a sealed carton on the floor with a carpeted or padded surface on the top side of carton.
Please put a heavy object into the carton for balance prior to assembling the office chair.
Place the Chair Seat (B) upside down on the carton.
Attach the Chair Back with Arm (A) into the bottom of Chair Seat (B) by using 6 piece of Bolts (1) as shown.
Use Allen Wrench (2) to tighten the Bolts (1) clockwise until secure.
Insert the 6 pieces of Plastic Covers (3) into the corresponding holes on the side of Chair Back with Arm (A) as shown.
3
1
3
1
3
1x4pcs
Customer Service 908-368-1025︱ ︱ ︱ ︱ www.modwayfurniture.com
F
F
B
A
2x1pc 3x6pc
F
E
1
B
1
3
F
F
1
1
3
A
Hardware & Tool required
Page 2 of 4
2