Table of Contents
Advertisement
Check list
The check list must be completed by the installer.
• In the event of a service, this information may be called for.
• Installation shall always be done according to the Installation and maintenance manual.
• Installation shall always be carried out in a professional manner.
• Following installation, the unit shall be inspected and checked for functionality.
The points below shall be checked off.
Pipe installation
†
The system has been filled, positioned and adjusted in the correct manner according to the
instructions.
†
The products are positioned so that they can be serviced.
†
Pumps, valves, etc. are dimensioned for the required flows.
†
The unit has been tested for leaks and tightness.
†
Bleeding performed (re-bleeding may be necessary).
Electrical installation
†
Proper wiring, performed according to current regulations.
†
Correct connection to the controlling product.
Customer information (adapted to the relevant installation)
†
Start-up with customer/installer.
†
Review of the cooling unit's function.
†
Installation and maintenance manual supplied to the customer.
†
Check and filling, system.
†
Information on fine adjustments, settings, etc.
†
Information on potential operational malfunction and remedial action.
†
Guarantees and insurance.
†
Information and procedure for fault registration.
7
CTC EcoComfort
Advertisement
Table of Contents
