Table of Contents
Advertisement
3.8
Connecting the diverting valve (Y60)
Connect the divering valve according to the instruction below. The diverting valve must be part of the installation
showed in Alt.1 (common underfl oor heating/cooling ).
Diverting valve ESBE VRG 230/Ara 635
Knob
Actuator
The mixing valve motor is mounted on the
valve with the knob in the centre position.
The valve can be mounted inversely, right to left, left to right.
The direction of the motor can be changed using the loop under the actuator cap.
The loop is always connected towards the heat pump.
Diverting valve LK EMV 110-K
When the motor transfers power to the black wire, port A opens
and port B closes.
Flow AB to A = hot water production and Black is powered.
NB: The valve must be "turned round" in order to change
direction.The valve must always be fi tted so that the fl ow can
move freely.
14
CTC EcoComfort
Diverting valve
Up
Down
Groove in shaft coupling
A
AB
B
Advertisement
Table of Contents
