Advertisement
•
Drill the wall or ceiling in the required location with regard to any concealed wiring
or pipework, use a wall plug if required and screw in a dome head screw leaving the
head 4mm proud of the surface.
•
Locate the keyhole slot in the base of the light unit over the screw head and ensure
the light is securely fixed.
•
Adjust the angle of the head unit as required.
OPERATION
•
In AUTO mode the motion sensor will turn on the light when movement is detected
only in low light environments.
•
After motion ceases to be detected, the light will
extinguish after 25 seconds.
•
When in the ON mode the light will remain
permanently lit.
MAINTENANCE
•
Clean the unit only with a soft dry cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
SPECIFICATION
Power supply:
Material:
Light Source:
Output power:
Ambient light:
Sensor distance:
Sensor angle:
Time delay:
Product weight:
Product size H x W x D:
IP rating
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
3×AA batteries (NOT included)
ABS, PS
1×1W COB LED
120 lumen
<10LUX
0-5m
120°
25±2 sec (Auto-delay function)
132g
100×85×125mm
IP42
Made in China. PR2 9PP
Man Rev 1.0
Advertisement
