Pro-Elec PEL01350 Quick Start Manual

Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
• Avoid locations of high temperature or humidity.
• The lamp is rated at IP65 for external use.
WHAT'S INCLUDED
• Lamp assembly.
• User manual.
INSTALLATION
• The road stud can be either bolted to the surface or affixed using epoxy adhesive.
• Ensure the surface and the base of the stud are clean before applying adhesive.
Allow at least 8 hours for the adhesive to cure fully.
OPERATION
• Allow at least 8hrs for the battery to fully charge initially.
NOTE: the lamp does not light except in low ambient light levels.
• When the ambient light falls below a preset level the LEDs will illuminate
constantly.
CLEANING & MAINTENANCE
• Clean the unit only with a damp cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
Solar Road Stud Light
Model: PEL01350
1