LG 49VL5F Owner's Manual page 77

[Input Manager]
Specify a label for each input source.
[SIMPLINK Setup]
• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage.
• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and E.
• [Standby]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
[All]
[Send Only]
[Receive Only]
[Off]
[Crestron]
• This function enables synchronization with applications provided by Crestron.
• [Server]: This menu sets the server's IP address for the network connection with the server (equipment provided by
Crestron).
• [Port (1024~65535)]: This menu sets the port for the network connection with the server. The default port number
is 41794.
• [IP ID (3~254)]: This menu sets a unique ID for synchronizing with the application.
Transmission
O
O
X
X
17
Reception
O
X
O
X